Plastic Fixed-gun UV Spray Painting Line System

Plastic Fixed-gun UV Spray Painting Line  (for referenc only):

1. Process: Cleaning-Loading-Preheating-Manual Dedusting-Ionization-Base Coat-Flashoff-IR Oven-Cooling-Dedusting-Top Coat (UV Coating)-Flashoff-IR Oven-UV Oven-Cooling-QC-Unloading-Packing

2. Main Components: Electrostatic Dedusting Booth - Spray Booth - Air Shower - Fresh Air System/Air Suction Unit (AC Drive) - Clean Room - Conveyor System (AC Drive) - IR Oven - UV oven - Paint Kitchen - Central Water Supply System (optional) - Waste Gas Treatment (optional) - Epoxy Floor - Electrical Control Panel - Air Compressor - Fire Fighting System

Application of Plastic Fixed-gun UV Spray Painting Line

This type of  Plastic Fixed-gun UV Spray Painting Line is widely usded for painting phone casing, camera casing, music player casing, toy, LCD panel, cosmetic bottle caps, pen casing, wine bottle caps, etc. And the accetability can reach over 95% and the quality remains stable.

Introduction of UV Oven:

1. Main body of UV oven is made of sandwich board with insulation.

2. UV Oven is specially is uded for curing of light curing coatings.

3. Due to UV curing under normal temperature, it is applicable for various items and there is not need to give direct heating as it is one type of light curing.

4. Generally, UV curing only takes 20sec so it can save area, energy, investment and running cost.

5. Life span of UV lamp is 1500-2000h. Furthermore, 15-20% of the UV will disappear in its final period. Therefore, the reflection cover should be cleaned up regularly.