High vacuum box furnace 1000-1200℃

High vacuum box furnace 1000-1200℃



Extra equipments:
1.Rotary vacuum pump 2*Z-1 or high vacuum unit;
2.Glass rotor flow meter and import & export gas pipeline
3.Installation, debugging and training

1.The highest temperature reaches 1000℃and 1200℃.
2.Adopt the vacuum forming technology. Furnace wires are embedded in the inner surface of the ceramic fiber chamber. One-step forming liner of furnace chamber could prevent heating elements from the pollution of volatile matter.
3.Furnace wires are embedded in the inner four sides of the changeable chamber. Special insulation is designed.
4.Double-layer heat insulation and air circulation allow the outside surface in a low temperature.
5.Can load and open the furnace door, it is convenient for loading and charging, have double furnace door, the furnace shell takes pressure vessel welding technology, The vacuum degree can reach 6.67×10-2Pa
6.Designed with the following functions:SCR control;  PID parameter self-setting; manual or automatic switch without interference; 30 programmable periods; continuously constant temperature and temperature control; automatically power off when the furnace door is opened; over-temperature alarm; the built-in parameter password to control the furnace.
7. Equipped with the fast heating rate of 5-20℃/min and the low energy consumption of more than 50%.
1.You can choose RS-485 communication port, Sigma data management software, which can have record history data and rising curves without paper, with the functions of adjusting the temperature error, can control more computers.
2.The multiple safety protection design provides good safety and long working life.